Kenwood KDC-X8019BT - Manual (Page 46)

46 | KDC-X8019BT/ KDC-X8019BTL
Bluetooth Setup
5
Transmit the PIN code
Press the [VOL] knob.
If “Pairing Success” is displayed, registration is
completed.
✍ If the error message appears even though the
PIN code is correct, try <Registering Special
Bluetooth device>.
6 Return to the device list
Press the [MENU] button.
7
Exit BT Settings mode
Press the [
] button.
⁄
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1. Select Special device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Pairing” > “SPCL DVC
Select”.
2. Enter Special device registration mode
Press the [VOL] knob.
A list is displayed.
3. Select a device name
Turn the [VOL] knob and push the center when
the desired device name is displayed.
If “Completed” is displayed, registration is
completed.
4. Go through the procedure step 3 of
<Registering from this unit> and complete
the registration (pairing).
Cancelling Special device registration mode
Press the [MENU] button for at least 1 second.
⁄
• If the device name is not in the list, select “Other Phones”.
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1 Enter Bluetooth mode
Press the [
] button.
✍ You can also select from “Settings” in Menu List
mode.
2
Enter PIN code edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
> “Detailed Setup” > “PIN
Code Edit”.
The current setting of PIN code is displayed.
3 Input the PIN code
1. Turn the [VOL] knob and press it when the
desired item is displayed.
Select the digit.
2. Turn the [VOL] knob to select the numbers,
and then press the [VOL] knob.
4
Register a PIN code
Press the [VOL] knob.
If “Completed” is displayed, registration is
completed.
5 Exit BT Settings mode
Press the [
] button.
⁄
• By default, “0000” is specified.
• A PIN code can be specified with up to eight digits.
B64-4900-00_00_en.indd 46 11/12/28 12:04