Kenwood KDC-X8019BT - Manual (Page 36)

36 | KDC-X8019BT/ KDC-X8019BTL
Audio Adjustments
You can select from 22 Equalizer curve types for
iPod when “iPod” is selected.
1. Enter iPod Equalizer mode
Press the [VOL] knob.
2. Select the iPod Equalizer curve
Turn the [VOL] knob and press it when the
desired item is displayed.
5 Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
• You can select for each source.
Manual Equalizer Control
You can adjust following Equalizer Control items.
Band Item Range
“BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB
“B.Ex” Bass Effect “ON”/ “OFF”
“BAND2” (100 Hz) “GAIN” Band level -9 –+9 dB
“BAND3” (160 Hz) “GAIN” Band level -9 –+9 dB
“BAND4” (250 Hz) “GAIN” Band level -9 –+9 dB
“BAND5” (400 Hz) “GAIN” Band level -9 –+9 dB
“BAND6” (630 Hz) “GAIN” Band level -9 –+9 dB
“BAND7” (1 kHz) “GAIN” Band level -9 –+9 dB
“BAND8” (1.6 kHz) “GAIN” Band level -9 –+9 dB
“BAND9” (2.5 kHz) “GAIN” Band level -9 –+9 dB
“BAND10” (4 kHz) “GAIN” Band level -9 –+9 dB
“BAND11” (6.3 kHz) “GAIN” Band level -9 –+9 dB
“BAND12” (10 kHz) “GAIN” Band level -9 –+9 dB
“BAND13” (16kHz) “GAIN” Band level -9 –+9 dB
“BAND1” – “BAND13” “Q” Quality 1.35/ 1.5/ 2.0
( : Factory setting)
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Manual Equalizer Control mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Manual Equalizer”.
4 Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
• HIGHWAY-SOUND
Increases the volume of faintest sound being lost by road
noises to make the sound more audible. Additionally, it
accentuates bass sound being lost by road noises to make
the bass sound more dynamic.
This function is not effective for the Tuner source.
• Supreme
Natural sound can be reproduced by restoring the
information lost, or the waveforms deformed, due to
audio compression.
This function is effective for compressed music.
• Dual Zone System
Main source and sub source (Auxiliary input) output Front
channel and Rear channel separately.
• Space Enhancer
This function is not effective for the Tuner source.
Preset Equalizer curve Select
You can select following Equalizer curve.
Display Equalizer curve
“User” User*
“Natural” Natural
“Rock” Rock
“Pops” Pops
“Easy” Easy
“Top 40” Top 40
“Jazz” Jazz
“Powerful” Powerful
“iPod” iPod (During iPod source only)
* The Equalizer curve set in the section <Manual Equalizer
Control> is recalled.
( : Factory setting)
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Enter Preset Equalizer mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Preset Equalizer”.
4
Select the Equalizer curve
Turn the [VOL] knob and press it when the
desired item is displayed.
✍ Select the iPod Equalizer curve
B64-4900-00_00_en.indd 36 11/12/28 12:04