6 preparing the product for use, 1 safety precautions before use, 2 unpacking and contents – Videotec ULISSE COMPACT User Manual
Page 12: 1 unpacking, 2 contents, 3 safely disposing of packaging material, 1 unpacking 6.2.2 contents
EN - English - I
nstruc
tions manual
12
MNVCUCZ_1351_EN
6 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
6.1 Safety precautions before use
The electrical system to which the unit is
connected must be equipped with a 20A
max automatic bipolar circuit breaker.
The minimum distance between the
contacts must be 3mm (0.1in). The circuit
breaker must be provided with protection
against the fault current towards the
ground (differential) and the overcurrent
(magnetothermal).
The appliance includes moving parts. Make
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
Fig. 1
6.2 Unpacking and contents
6.2.1 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
6.2.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Positioning unit
• Accessories box
• Serial extension cable
• Label
• Silicon sheath
• Ties
• CD-ROM with installation software (for IP version
only)
• Instructions manual
6.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.