Videotec ULISSE COMPACT - Manual (Page 41)

Instruc
tions manual - English - EN
41 MNVCUCZ_1351_EN
9.1.10.8 Motion Recall Menu
It is possibile to set the unit so that, after a given
inactivity interval, it automatically carries out the
movement function set by the operator.
From the menu it is possible to set the following
parameters:
1. Movement Type: Choice of type of movement
to be loaded (None, Home, Autopan, Patrol, Tour
1, Tour 2, Tour 3).
2. Movement Delay: The time (in seconds) that
needs to elapse from the state of inactivity of
the Joystick before loading the set movement.
MOTION RECALL
------------------------
1>MOVEMENT TYPE : NONE
2 MOVEMENT DELAY: 60
Fig. 77
9.1.10.9 Advanced Menu
1. Static Control: Enables control of the position
only when the pan & tilt is stopped
2. Dynamic Control: Enables control of the
position only when the pan & tilt is moving
3. Cyclic Homing: If other than zero, it sets a new
homing procedure after the specified number of
hours.
4. Economy Mode: Reduces the motor toque
when the pan & tilt is not moving. Do not enable
in presence of strong wind or vibrations.
ADVANCED
------------------------
1>STATIC CONTROL : Y
2 DYNAMIC CONTROL : Y
3 CYCLIC HOMING : 0
4 ECO MODE : Y
Fig. 78