Videotec ULISSE COMPACT - Manual (Page 21)

Instruc
tions manual - English - EN
21 MNVCUCZ_1351_EN
The dusk switch is especially useful in areas
where brightness varies greatly.
When the illuminator switches on, the
camera automatically switches to Night
Mode.
For further details on configuration and use refer to
the relative chapter (9.1.9.11 Advanced Setting Menu
(Infrared), page 36).
The dusk switch must be connected between
terminals A5 and G of the alarm board (dusk switch
clean contact).
Fig. 25
Characteristics of the dusk switch (not supplied as
standard): Clean contact output and sensitivity range
comprised between 1 and 100 LUX, normally open.
7.1.7.4 Connecting the Washer
For further details on configuration and
use, refer to the relative manual.
When the washing system is enabled, the
relay 2 is used exclusively for the activation
of the pump (9.1.13 Washer Menu, page 44).