Videotec ULISSE COMPACT - Manual (Page 37)

Instruc
tions manual - English - EN
37 MNVCUCZ_1351_EN
9.1.9.12 Advanced Setting Menu (White
Balance)
Once inside the menu it is possibile to set the
following parameters:
1. Mode: Sets the type of control on White
Balance. The possible values are:
• Automatic: Sets automatic white balance.
This is the recommended solution.
• Manual: Enables manual setting of red and
blue gains.
• Outdoor: Sets fixed red and blue gains for
outdoor applications.
• Indoor: Sets fixed red and blue gains for
indoor applications.
• ATW: Enables Auto Tracing White Balance.
2. Red Value: Sets the value of the red gain.
WHITE BALANCE
------------------------
1>MODE : MANUAL
2 RED VALUE : 0
3 BLUE VALUE: 0
Fig. 67
Xxx
9.1.9.13 Advanced Setting Menu (Other)
1. Sharpness: Sets the sharpness value of the
image.
2. High Resolution: Enables the High Resolution
function. The output video signal has a higher
resolution.
3. Wide Dynamic: Enables the Wide Dynamic
function. It improves vision when some zones
within the frame are much brighter than others.
4. Stabilizer: Enables the electronic image
stabilization function.
5. Progressive Scan: Enables the Progressive Scan
function. Gives a more stable image when the
Pan & Tilt is connected to a video server.
6. Noise Reduction: Sets the noise reduction
level. Vary the parameter according to the
environmental conditions to obtain a higher
contrast image.
OTHER
------------------------
1 SHARPNESS : 6
2 HIGH RESOLUTION : N
3 WIDE DYNAMIC : OFF
4 STABILIZER : N
5 PROGRESSIVE SCAN: N
6 NOISE REDUCTION : 2
Fig. 68