6 connection of the ethernet cable – Videotec ULISSE COMPACT User Manual
Page 18
EN - English - I
nstruc
tions manual
18
MNVCUCZ_1351_EN
7.1.6 Connection of the Ethernet cable
Telemetry transmission and video signal
pass through the Ethernet cable. Do not
connect cable RS-485 and the video cable.
Operating mode valid only on version with
IP board.
To connect the net cable a UTP: Category 5E or
superior, 4 pair, maximum length 100m (328ft).
Crimp the RJ45 connector on the Ethernet cable.
Crimping should be straight-through if passing via
a hub or switch while it should be crossover if you
are connecting directly to the PC for the necessary
checks.
Fig. 16 Crimped cable.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A
B
Fig. 17 Straight-through cable.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A
B
Fig. 18 Crossover cable.
Connect the crimped net cable to connector RJ45
located on the base of the unit.
CFG RESET
ETHERNET
Fig. 19
The example below shows a typical installation.
Hub / Switch
Personal
Computer
UTP cat 5E
UTP cat 5E
Fig. 20