Videotec ULISSE COMPACT - Manual (Page 65)

Instruc
tions manual - English - EN
65 MNVCUCZ_1351_EN
PROBLEM Error E7-PRST. NOT
CONFIGURED.
CAUSE Recalling of a non programmed
preset.
SOLUTION Seek assistance.
PROBLEM Error E8-TOUR NOT
CONFIGURED.
CAUSE Recalling of a non configured Tour.
SOLUTION Save the Tour using the relative
control (11.6 Recalling a pattern
(Tour), page 56).
PROBLEM Error E9-TEMP. TOO LOW.
CAUSE The environment temperature is
too low.
SOLUTION The movements of the P&T unit
is blocked to prevent mechanical
damage.
PROBLEM Alarm AL6 :WATER LEVEL LOW
CAUSE Low wiper liquid level.
SOLUTION Fill the tank of the pump using the
suitable wiper liquid.
PROBLEM The video is not viewed
correctly using the version with
H.264/AV encoder.
CAUSE The encoder parameters are
incorrect.
SOLUTION Make sure that the Input
Deinterlacing item is set to OFF in
the Chamber Parameter page of
the web interface (9.3.12 Camera
Parameters, page 53). The Input
Format item must be set on
Composite PAL or Composite NTSC,
depending on the camera installed
on the unit.