9 configuration, 1 osm interface, 1 on screen menu (osm) – Videotec ULISSE COMPACT User Manual

Page 27: 1 how to use the joystick, 2 how to move around the menus

Advertising

Instruc

tions manual - English - EN

MNVCUCZ_1351_EN

9 Configuration

The product can be configured through the OSM

interface (text on analogue video signal), web

interface (through a browser) and VMS VIDEOTEC

software (installed on a PC).

9.1 OSM interface

9.1.1 On screen menu (OSM)

During the normal operation of the unit it is possible

to activate the On Screen Menu in order to set the

advanced functions using the corresponding keys.

For further information, refer to the manual of the

keyboard in use. For further information refer to the

relative chapter (11.13 Special controls, page 58).
Exit the On Screen Menu with Zoom Wide (or Zoom-).

This is a dynamic self-configuration menu

based on the Pan & Tilt model.

9.1.1.1 How to use the joystick

All operations in the menus are carried out using the

joystick.

Down

Left

Right

Fig. 36

Exit

Confirm

Fig. 37

If using a control keyboard with a dual axis

joystick, use the Zoom Wide and Zoom

Tele keys to carry out the Exit and Confirm

commands.

9.1.2 How to move around the menus

Each page of the OSM shows a list of parameters or

sub-menus that can be selected by the operator. To

scroll through the parameters move the cursor by

operating the joystick (up and down).

ADVANCED

------------------------

1 ZOOM SPEED : 7

2>DIGITAL ZOOM : N

3 WIDE DYNAMIC : Y

4 HIGH RESOLUTION: N

5 BACKLIGHT COMP.: Y

6 FOCUS >

7 EXPOSURE >

8 INFRARED >

9 WHITE BALANCE >

Fig. 38

The symbol > at the end of a line indicates the

presence of a specific submenu. To enter the

submenu just confirm the menu item. To exit the

submenu use the Exit function (Zoom Wide).