Acer Altos G901 - Manual (Page 198)

Appendix B: System management 182
7 From the Restricted Mode list, choose either:
8 From the Connection Mode list, choose either:
9 Click Save to save the changes.
10 Click Close to return to the PEM window.
Exiting the SSU
Exiting the SSU closes all SSU windows.
• Disabled Remote systems are not allowed to initiate
connections.
• Enabled A remote system can initiate a connection, but
cannot perform control operations such as
power down, reset, or front panel NMI.
• Disabled The remote system has full control of the server.
• Direct Connect The COM2 port on the server is connected
by a serial cable to the remote system.
• Modem Connect The COM2 port on the server is connected
to a modem.
BB!H:11!vh!.!FO/cppl!!Qbhf!293!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN