Acer Altos G901 - Manual (Page 95)

79
3 Carefully pull on the carrier handle and slide the carrier out of the
bay.
4 Install a new drive into the carrier (refer to page 76).
5 Hold the carrier handle in the fully open position and slide the
carrier into the desired bay.
6 Push the carrier into the drive bay until the carrier handle latch
engages the locking slot in the edge of the drive bay.
Label Description
A Handle
B Latch
C Locking slot
Figure 40 - Removing a drive carrier
BB!H:11!vh!.!FO/cppl!!Qbhf!8:!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN