Acer Altos G901 - Manual (Page 79)

63
Processors
This section includes instructions for installing and removing processors
and heat sinks.
Processor sequence
You must install a processor in processor socket 1. When installing
multiple processors, populate the processor sockets in the order shown
in the figure below.
Important: If you are not using processor sockets 3 and 4, leave
the foam block in place. The block is required for proper airflow
for cooling the processors.
Figure 27 - Correct order in loading processors
BB!H:11!vh!.!FO/cppl!!Qbhf!74!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN