Acer Altos G901 - Manual (Page 88)

3 Hardware configuration 72
6 If you are not reinstalling a board in the same slot, install an
expansion slot cover and reinstall the rear access panel (refer to
page 45).
If you are installing a new board, follow the instructions on
page 69.
Installing and removing a PCI add-in board in
a non-hot-plug slot
Caution! The PCI add-in board slots located under the system
board access panel are not hot-plug slots.
Figure 36 - Installing and removing a non-hot-plug PCI add-in board
BB!H:11!vh!.!FO/cppl!!Qbhf!83!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN