Acer Altos G901 - Manual (Page 91)

75
Hot-swap SCSI drives
Hot-swap drives are installed in carriers that fit into the hot-swap drive
bay. This section describes the LED status indicators for the drive bays
and gives instructions for using the drive carriers to install and remove
drives.
Checking a hot-swap SCSI drive status indicator
Each hot-swap SCSI drive slot has a LED that indicates drive status. To
view the LEDs, open the front access door of the bezel.
Label Description Label Description
A Front access door B LED status indicators
Figure 37 - Hot-swap SCSI drive bay and status indicators
BB!H:11!vh!.!FO/cppl!!Qbhf!86!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN