Acer Altos G901 - Manual (Page 68)

3 Hardware configuration 52
To install the access cover to the system boards
1 Orient the access cover with the captive screws toward the front of
the server.
2 Insert the tabs on the rear of the cover into the slots at the rear of
the chassis.
3 Press down gently and tighten the captive screws at the front of
the cover.
Memory board
To remove the memory board
1 Grasp the bracket on the top edge of the memory board and pull
straight up until the board disengages from the connector on the
processor board.
2 Lift the memory board out of the chassis.
Figure 18 - Removing the memory board
BB!H:11!vh!.!FO/cppl!!Qbhf!63!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN