Acer Altos G901 - Manual (Page 99)

83
Caution! To avoid damaging the module, do not tilt or twist the
power supply module as you pull it from the power supply bay.
The module disengaging from its connector causes the initial
resistance you will feel. Use even, steady force to remove the
module.
4 Unplug the power cord from the power supply.
5 If you are not going to install a replacement module, you must
install a filler panel in the vacant slot.
Label Description Label Description
A Screws B Latch handle
Figure 43 - Removing a power supply module
BB!H:11!vh!.!FO/cppl!!Qbhf!94!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN