Front access panel – Acer Altos G901 User Manual
Page 61
45
3
Lift the panel away from the chassis.
To install the rear access panel
Note: Before installing the rear access panel, check that you have
not left any tool or loose parts inside the system.
1
Position the panel on the chassis so that the panel tabs align with
the chassis slots.
2
While lightly pressing the panel against the chassis, slide it toward
the front of the chassis until the panel tabs fully engage the chassis
slots.
3
Attach the panel to the chassis with the captive fasteners located
on the rear edge of the panel.
Front access panel
The front access panel provides access to the hot-swap fans, to devices
in the peripherals bay, and to the hot-swap drive bay.
Figure 12 - Removing the rear access panel
BB!H:11!vh!.!FO/cppl!!Qbhf!56!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN