AT&T DEFINITY 555-230-223 - Manual (Page 15)

Introduction
CallVisor ASAI Over the DEFINITY LAN Gateway is provided with a default set
of administered parameters, but customers can also administer the LAN
parameters and client information to conform to their networks.
NOTE 1:
AT&T support services for the DEFINITY LAN Gateway system will not
troubleshoot a customer LAN. If the customer LAN is experiencing
difficulties, customers should follow the escalation path supplied by their
LAN provider.
NOTE 2:
DEFINITY switch administration of ASAI does not change when using
CallVisor ASAI over the DEFINITY LAN Gateway.
Depending on the system setup desired, customers can configure and administer
the DEFINITY LAN Gateway system in several ways:
Using telnet over TCP/IP
Using a dumb terminal dedicated to the DEFINITY LAN Gateway circuit
pack
Using the RS-232 port of a PC or host attached to the DEFINITY LAN
Gateway circuit pack.
A menu-driven interface offers ease of administration, and help screens are
available if assistance is needed. In addition, security features explained in this
chapter help guard against unauthorized access.
System Hardware
The application for the ASAI-Ethernet interface is supported by a system
assembly, a ‘‘sandwich’’ of the two boards mentioned previously, the TN2208
(Multi-Function Board) and the TN2170 (Alarm Board). Figure 1-1 shows the
DEFINITY LAN Gateway system assembly.
1-2 Issue 1 January 1996