AT&T DEFINITY 555-230-223 - Manual (Page 62)

System Administration 3
This chapter presents the screens used for administering and maintaining the
system. Sample configurations are located in Appendix E.
Getting Started
This section details information about the screens, procedures for logging on,
and procedures for moving among screens.
Screen/System Conventions
Screen and system conventions are listed below.
Not all function keys apply to all screens.
Information in read-only fields is static. It reflects conditions present at the
time the screen is displayed, and is not updated in real-time as conditions
change.
A selected field is the one where the cursor currently resides.
If you make a mistake while typing data on a line, backspace and
overwrite the characters or use the
CLEAR key to clear the field, If you
have already passed the line that has the mistake, use Tab or the arrow
keys to return to the field, and type over the characters.
Menu items followed by three dots (...) have submenus.
When data is added on a screen, after you press the ENTER function key,
the previous screen reappears with the cursor positioned at the beginning
of the new entry. (The new data is in alphabetical or numerical sequence,
depending on how the data is organized for that screen).
Issue 1 January 1996 3-1