AT&T DEFINITY 555-230-223 - Manual (Page 88)

System Administration
Network Routing Information — Network
Routing Table
This line is used to provide abbreviated help on the currently selected field.
TCP/IP Administration
Network Routing Information
Network Routing Table
Destination
Page
X of X
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
Type
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
_________
Status
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
Gateway
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
ADD DELETE CANCEL REFRESH NXTPG PRVPG HELP
Screen 3-12. Network Routing Table
This screen has two uses. First, if automatic routing is not enabled (see the
Network Routing Daemon screen), users can administer the set of network
routes. Second, if automatic routing is enabled, it displays the current set of
network routes provided by the Network Routing Daemon.
Routes appear on this screen in numerical order by IP address. A maximum of
65 routes may be administered.
NOTE:
If the routing daemon is enabled, the ADD and DELETE keys do not
appear on this screen.
Field Name Description
Destination Name or IP address of a host, or a partial IP address of a
network. Maximum field size = 20 characters.
Issue 1 January 1996 3-27