AT&T DEFINITY 555-230-223 - Manual (Page 93)

System Administration
Field Name Description
Port Port number used on the DEFINITY switch. Valid range is 1 to 12.
Each port can only be assigned once.
Client Name
or IP
Address Host name or IP address of the client machine authorized to
connect to this port. (Network name of the adjunct.) Must be
resolvable by the local host table, or be an IP address. Maximum
field size=20 characters.
Client Link Link number from 1 to 8, used by client when connecting to this
port if client has more than 1 logical link into the MFB. Default = 1.
Client Status Read-only. Either in-use or idle . Idle client states may
be modified or deleted. If you attempt to delete a port with a
busy status, the ASAI link associated with that port is
disconnected.
Use this screen as follows:
To delete a port:
1. Press Tab or use the arrow keys to move the cursor to the line you want to
delete, and then press DELETE . (This deletes the entire line.)
2. The following prompt appears: Are You Sure? (Y/N) . Type Y and press
Return .
If you type N and press Return , the cursor reappears at the beginning of the
line and the line is not deleted.
3. Repeat steps 1 and 2 until you have deleted all desired ports. Then press
CANCEL and the Main Menu will reappear.
To add a port, press ADD to access the Add Client Link screen.
3-32 Issue 1 January 1996