AT&T DEFINITY 555-230-223 - Manual (Page 73)

System Administration
Use this screen as follows:
1. Type the login you want to add to the system.
2. Press ENTER to submit the login.
3. The following prompt appears: New password:
Type the password to be associated with the login and press
Return .
Passwords follow normal UNIX

naming conventions. These are:
Each password must have at least 6 characters.
Each password must contain at least two alphabetic
characters and at least 1 numeric or special character.
‘‘Alphabetic’’ includes all uppercase and lowercase letters.
Each password must differ from the user’s login name and
any reverse or circular shift of that login name.
(Corresponding uppercase and lowercase letters are
considered equivalent.)
A new password must differ from the old one by at least three
characters.
NOTE:
The login for the primary administrator is not required to follow
these conventions when making up passwords.
4. The following prompt appears: Re-enter password:
Re-enter the password at the prompt and press Return again. If you
entered the password the same way both times, the password will be
added and the Login/Password Administration screen will reappear.
Repeat this procedure for each login and password you want to add.
3-12 Issue 1 January 1996