AT&T DEFINITY 555-230-223 - Manual (Page 30)

Installation
AT&
T
ENTER /YES
NEXT /NO
BACK
I2C
bus cable
Power
cable
SCSI
bus cable
Tie
wrap
Retaining
pins
Tape drive
(without cover)
SCSI
bus cable
Disk
drive
Power
supply
Alarm board
(TN2170)
Multi-Function board
(TN2208)
Figure 2-4. DEFINITY LAN Gateway System Assembly
!
WARNING:
The DEFINITY LAN Gateway system will automatically boot when
seated in the slots. Damage to the disk could occur if the assembly
is removed while booting. Therefore, try to avoid the need to adjust
or reinsert the assembly after the first attempt to insert it; make sure
that the assembly is properly aligned in the slot, and then insert it
with a single firm push.
Issue 1 January 1996 2-11