AT&T DEFINITY 555-230-223 - Manual (Page 155)

Appendix F: Returning the
Application to its Original State F
This appendix details how to return the system to its original state if it should
crash.
1. Make sure the administrative/maintenance terminal is physically
connected to Main/Port A on the TN2208.
2. Insert the original DEFINITY LAN Gateway tape that came with the
system into the system assembly and close the lever.
3. Press the BACK, NEXT/NO, and ENTER/YES buttons on the faceplate of
the TN2208 simultaneously. Hold them down until the LCD displays a line
of stars.
4. When the stars disappear, the terminal screen displays a message such
as the following:
MFB 386FW Version: AU00S07F0
Local Console: Output ON, Input OFF
Remote Maintenance Console: INACTIVE
-> FAC Reset - FAC 3 Button
5. Press CTRL C twice in quick succession.
The following prompt appears: command menu:
6. Type 7 and press Return . The following prompt appears:
Auto Boot Preempted
Enter 1 for Disk, 2 for Tape (Default=Disk):
Issue 1 January 1996 F-1