AT&T DEFINITY 555-230-223 - Manual (Page 53)

Installation
Host Name: ______________________________
Host IP Address: __________________
Subnet Mask: __________________
TCP/IP Administration
This Host
This line is used to provide abbreviated help on the currently selected field.
ENTER CLEAR CANCEL REFRESH HELP
Screen 2-5. This Host
2. If a host name different from the default (definity) is desired, in the
Host Name field type the new name to be assigned to this DEFINITY LAN
Gateway system. The machine name must be from 1 to 20 characters in
length.
3. If an IP address other than the default (192.168.25.10) is desired, type the
new IP address in the Host IP Address field.
4. If a subnet mask is desired, type the subnet mask name in the
Subnet Mask field.
5. Press ENTER to save the changes.
Task 12: Reboot the MFB
This task is performed to verify that the system can be rebooted.
1. At the login prompt, enter craft. The system displays the Password
prompt.
2. Enter the default password for the craft login. The system displays Enter
terminal type .
3. Enter one of the following:
513 for a 513 BCT or 715 BCT; enter 513 also for a 610/615 BCT
or a PC with a 513 emulation package. (Since 513 is the default,
you can just press
Return to select it.)
2-34 Issue 1 January 1996