AT&T DEFINITY 555-230-223 - Manual (Page 90)

System Administration
Network Routing Table — Add Routes
TCP/IP Administration
Network Routing Information
Network Routing Table
Destination
____________________________ Type
_______
Add Routes
Gateway
____________________________
This line is used to provide abbreviated help on the currently selected field.
ENTER CLEAR CANCEL REFRESH HELP
Screen 3-13. Network Routing Table — Add Routes
This screen is used to add network routes. A maximum of 65 routes may be
added.
When you add a route, after you press the ENTER function key, the previous
screen reappears with the cursor positioned at the beginning of the new entry.
Field Name Description
Destination Name or IP address of a host, or a partial IP address of
a network. Maximum field size=20 characters.
Type The type of destination, either host or network .
(Most routes are to network destinations.)
Gateway Name or IP address of the gateway, the machine used
to route all traffic to the given destination. Maximum
field size=20 characters.
Issue 1 January 1996 3-29