AT&T DEFINITY 555-230-223 - Manual (Page 86)

System Administration
Network Routing Information — Default
Gateway
Name or IP Address: ____________________ Status: ______
TCP/IP Administration
Network Routing Information
Default Gateway
This line is used to provide abbreviated help on the currently selected field.
ENTER CLEAR CANCEL REFRESH HELP
Screen 3-11. Default Gateway
A default gateway allows the Multi-Function Board to communicate with other
hosts in other LANs. The Default Gateway screen is used to 1) initially identify
the default gateway to the Multi-Function Board; 2) change the Name or IP
Address and check the Status; or 3) verify that the Multi-Function board is not
communicating with another host because the Status of the Default Gateway is
‘‘down.’’
This screen is protected against multiple users making simultaneous changes as
follows: If a user presses the
ENTER function key, the system checks to see if
the information that was displayed upon entry to this screen has changed. If it
has, the data is not entered and the user is apprised of the problem and exited
from the screen. The previous screen (TCP/IP Administration) reappears.
Issue 1 January 1996 3-25