AT&T DEFINITY 555-230-223 - Manual (Page 32)

Installation
When the DEFINITY LAN Gateway system is coming up, the LCD should
display the following states (in order):
BTEST (Firmware board tests)
BOOT (Booting the operating system)
OSINIT (Operating system initialization)
OS (Operating system)
AINIT (DEFINITY LAN Gateway system initialization)
ASAI X (DEFINITY LAN Gateway running with X attached clients)
If the system does not come up to the ASAI X state within 30 minutes (10
to 15 minutes is average), contact the Technical Service Center (TSC) for
assistance.
7. If you are installing the DEFINITY LAN Gateway system in an existing
switch, insert the 1/2-inch blank faceplate adapter into the fifth DEFINITY
LAN Gateway system slot.
Issue 1 January 1996 2-13