Sony CCD-TRV608 - Manual (Page 56)

Connect your digital video camera to the IEEE1394 port on your PC and set it to
play mode. That is, your device should be set in the mode you would normally use
to view scenes already recorded on the tape inside the machine.
If the connection between the PC and the device is working properly:
A blue monitor window is displayed. Depending on your selected task, the message
in the information display panel will read 'There is ... of free space in the
destination directory,' (for capturing movie scenes) or 'Ready to capture still
picture.'
If there is a problem with the connection between the PC and the
device:
A black monitor window will be displayed. If the digital video camera is not
properly connected to the PC, or is not set to play mode, or if a DV cassette isn't
present in the machine, the message on the information display panel will say
"Camcorder Not Found."
If there seems to a problem with the connection between the PC & the digital video camera, try
clicking the [refresh connection] button.
DV cassette indication
When a DV cassette is present in the digital video camera, this icon
becomes active (glows). When a cassette is not present, the icon is inactive
(appears gray).
Copyright © 2001 PIXELA Corp. All rights reserved.