AC International Lenze SV01B - Manual (Page 22)

ENGLISH 2
Commissioning
Code Possible Settings
IMPORTANT
No. Name Default Selection
TB-4 Output 0 0...2 (same as P40)
24 Dynamic Braking
For use with Dynamic Braking option
25 Network Activated Requires optional communication
module (refer to the network module
documentation).
Loss of Load
Threshold 0 0 {%} 200 P40, P42 = 0: Output will energize
if motor load falls below P45 value
longer than P4 time
Loss of Load
Delay 0.0 0.0 {s} 240.0
TB-0 Output 0 0 None 2-0 VDC signal can be converted to
4-20 mA with a total circuit impedance
of 500
W
 0-0 VDC Output Frequency
2 2-0 VDC Output Frequency
 0-0 VDC Load
4 2-0 VDC Load
5 0-0 VDC Torque
 2-0 VDC Torque
7 0-0 VDC Power (kW)
8 2-0 VDC Power (kW)
9 Network Controlled
Requires optional communication
module (refer to the network module
documentation).
TB-0 Scaling:
Frequency 0.0 .0 {Hz} 2000 If P50 =  or 2, sets the frequency at
which output equals 0 VDC
TB-0 Scaling:
Load 200 0 {%} 500 If P50 =  or 4, sets the Load (as a
percent of drive current rating) at which
output equals 0 VDC.
TB-0 Scaling:
Torque 00 0 {%} 000 If P50 = 5 or , sets the Torque (as a
percent of motor rated torque) at which
output equals 0 VDC
TB-0 Scaling:
Power (kW) .0 0. {kW} 200.0 If P50 = 7 or 8, sets the power at
which output equals 0 VDC