Goulds Pumps 3296M - IOM - Manual (Page 2)

FOREWORD
This manual provides instructions for the Installation, Operation, and Maintenance of the Goulds Model 3296 “M
Group” Magnetic Drive Process Pump. This manual must be read and understood before installation and start-up.
The design, materials, and workmanship incorporated in the construction of Goulds pumps makes them capable of
giving, trouble-free service. The life and satisfactory service of any mechanical unit, however, is enhanced and
extended by correct application, proper installation, periodic inspection, condition monitoring and careful
maintenance. This instruction manual was prepared to assist operators in understanding the construction and the
correct methods of installing, operating, and maintaining these pumps.
Goulds shall not be liable for physical injury, damage or delays caused by a failure to observe the instructions
for Installation, Operation, and Maintenance contained in this manual.
Warranty is valid only when genuine Goulds parts are used.
Use of the equipment on a service other than stated in the order could nullify the warranty, unless written approval
is obtained in advance from Goulds Pumps, Inc.
Supervision by an authorized Goulds representative is recommended to assure proper installation.
Additional manuals can be obtained by contacting your local Goulds representative or by calling 1-800-446-8537.
THIS MANUAL EXPLAINS
n Proper Installation
n Start Up Procedures
n Operation Procedures
n Routine Maintenance
n Pump Overhaul
n Troubleshooting
n Ordering Spare or Repair Parts
3296 M Group 6/05
3