Clearances – Goulds Pumps 3296M - IOM User Manual
Page 69
3296 M Group 6/05
65
*BOLT TORQUE Ft-lbs. (N
l
M)
Check
Drive Mag Assy Nut (355A)
170 (230)
Wear Ring Screw (353B)
17 (25)
Clamp Ring Screws (370B)
12 (16)
Impeller Screw (198)
45 (60)
Adapter to Frame Screws (370)
50 (70)
Casing Nuts (425)
45 (60)
* Torque Values based on Dry Threads
EQUIPMENT # _________________________
DATE_________________________________
SERIAL # _____________________________
WORK ORDER # _______________________
PUMP SIZE ____________________________
NAME ________________________________
CLEARANCES
Wear Ring (Compare to Table 9)
Impeller to Casing . . . . . . . . . . . . . Actual
Impeller to Wear Ring . . . . . . . . . . Actual
Driven Magnet to Adapter . . . . . . . Actual
Drive Magnet to Rub Ring . . . . . . . Actual
Sleeve Bearings (Compare to Table 11)
Shaft to Bearing . . . . . . . . . . . . . . . Actual
Bearing to Bearing . . . . . . . . . . . . . Actual
Bearing to Adapter . . . . . . . . . . . . . Actual
LIQUID END INSPECTIONS
CHECKS
Parts Clean, Free of Burrs
Keyways and Keys Free of Burrs
O-ring Grooves Free of Burrs
Gasket Surfaces Clean
Casing (100) Thickness Meets Table 8
Containment Shell (750) Thicker Than .050 in. (1.25mm)
Cooling Passages in Adapter (108) Clear
Flush Screen (187)Clear
Bearings (117) Free of Cracks and Major Chips
O-ring Lube Compatible with Pumpage?
Driven Mag Assy (740A) Free of Erosion/Corrosion
Driven Assy Axial Travel .020-.060 in. (.5 to 1.5mm)
New Gaskets used for Assembly
Impeller Lockwasher (199A) Set