Return of materials – Goulds Pumps 3296M - IOM User Manual
Page 62
Advertising
RETURN OF MATERIALS
If it is necessary to return the pump to a Goulds factory
or repair facility for service certain procedures must be
followed.
A Return Material Label must be completed by the
USER prior to the return of the pump. The USER
must also contact a Goulds representative
prior to the return of the pump for instructions and
authorization to return the pump.
Before shipping check with your carrier for special
procedures that may be required when shipping highly
magnetic materials.
All pumps must be decontaminated prior to return,
reference Section 4, Flushing Pump.
58
3296 M Group 6/05
Advertising