Goulds Pumps 3296M - IOM - Manual (Page 36)

s
! WARNING
The magnets contained in this unit are extremely
powerful. Keep magnetic drive components and
magnetic tools apart from each other by a
minimum of six (6) feet [two (2) meters]. Serious
injury to fingers and hands will result.
15. Lift frame adapter (108) off shaft (122). Set aside.
NOTE: Outboard rotary sleeve bearing will
remain on shaft.
s
! WARNING
This component can weigh more than 50 lbs (23
kg). Care should be taken when handling.
16. Remove thrust bearing holder key from shaft
(178S) (Fig. J).
17. Remove outboard rotary sleeve bearing (117C)
and two spacer gaskets (360). Discard spacer
gaskets (Fig. J).
18. Press driven shaft (122A) out of driven magnet
assembly (740A). Remove key (178X) (Fig. K).
19. Wrap driven magnet assembly (740A) in a clean
cloth to keep clean and set aside away from
attracting metals.
s
! WARNING
The magnets contained in this unit are extremely
powerful. Keep magnetic drive components and
magnetic tools apart from each other by a
minimum of six (6) feet [two (2) meters]. Serious
injury to fingers and hands will result.
20. Remove and discard four shaft O-rings (497P)
(Fig. L). Set shaft aside.
21. Place frame adapter (108) on work bench as
shown. Remove wear ring bolts (353B) and flush
screen (187) (Fig. M).
32
3296 M Group 6/05
178S