Goulds Pumps 3296M - IOM - Manual (Page 68)

3296 M ASSEMBLY AND INSPECTION CHECKLIST
64
3296 M Group 6/05
POWER END INSPECTIONS CHECK
Bearing Frame (228) Clean
Gasket Surfaces Clean
No Cracks or Excessive Corrosion
Bearing Bores Maximum 3.1506 in. (80.025mm)
Ball Bearings (112) New or Clean
Oil Seal (333D) New
Labyrinth Seal (332A) O-rings serviceble
Labyrinth Seal (332A) Drain Port at 6:00
Drive Mag Assembly (740B) Clean, Free of Filings
Shaft (122B) Keyways and Keys Free of Burrs
Drive Shaft TIR < .0015 in. (.038mm)