Goulds Pumps 3296M - IOM - Manual (Page 44)

8. Set partially built driven assembly aside well away
from attracting metals. Prepare to build up frame
adapter assembly.
s
! WARNING
The magnets contained in this unit are extremely
powerful. Keep magnetic drive components and
magnetic tools apart from each other by a
minimum of six (6) feet [two (2) meters]. Serious
injury to fingers and hands will result otherwise.
9. Install outboard anti-rotation pin (445B) in frame
adapter (108) (Fig. D).
10. Install outboard stationary O-rings (496A)
(Fig. E). Lubricate O-rings and bores.
l
! CAUTION
Carefully stretch O-rings so when installed they fit
securely in O-ring groove. Care must be taken not
to over stretch the O-rings.
11. Install inboard stationary O-rings (496B)
(Fig. F). Lubricate O-rings.
40
3296 M Group 6/05
Fig. D
Fig. E
Fig. C