Festo Параллельный захват HGPP - Manual (Page 28)

HGPP-...-A
Festo HGPP-...-A 0110a English
28
Replacing grippers:
S Please note that readjustment is not usually necessary, when grippers are re-
placed by grippers of the same type with gripper fingers of the same type.
Exhausting the HGPP-... without protection against the load sliding down:
Warning
If there is a drop in pressure, the firmly
held work load will suddenly slide down.
S
Make sure that the gripper is not holding
a work load when it is exhausted.
8 Accessories
Designation Type
Pressure build up valve HEL-... / HEM-...
One-way flow control valve GRLZ-... / GRLA-...
Non return valve HGL-...
Hall sensor SMH-S1-...
Evaluating electronics for Hall sensor SMH-AE..-...
Inductive sensor SIES-Q5B-...
Support bracket for inductive sensor HGPP-HWS-...
Compressed air reservoir VZS-...
Adapter kit HAPG-...
Oil viscosity group 32 (as per ISO) OFSW-32
Grease
– Metal on metal
– Seals
Molycote DX
Molycote PG 75
Fig. 25
Fig. 24