9 stamping faxed documents (“stamp” function), To stamp faxed documents, Stamping faxed documents (“stamp” function) -19 – Konica Minolta bizhub 222 User Manual
Page 118: To stamp faxed documents -19
Useful transmission functions
6
362/350/282/250/222/200
6-19
Usef
ul tr
an
sm
ission
fu
nctio
n
s
Chap
te
r 6
6.9
Stamping faxed documents (“Stamp” function)
After specifying that a stamp be added to faxed documents, each page of
the document can be checked to determine whether or not it has been
scanned. Document pages that have not been stamped must be sent again.
To stamp faxed documents
0 In order to use the “Stamp” function, optional stamp unit must be in-
stalled.
0 When the “Stamp” function is selected, the document should be loaded
into the ADF. Transmission is not possible by positioning the document
on the original glass.
0 The “Stamp” function cannot be used together with the “2-Sided TX”
function.
0 The “Stamp” function is not available when copying.
1
Press the [Fax/Scan] key to display the Fax mode screen.
2
Touch [FAX Menu].
3
Touch [Set 2], and then
touch [Stamp].
4
Select the stamping po-
sition, and then touch
[Enter].