Konica Minolta bizhub 222 - Manual (Page 254)

Utility mode 10
362/350/282/250/222/200 10-71
Utility mode
Chapter 10
Specifying settings for the stamp and password comparison (mode 000)
Specify settings for stored (sent) stamping and communication password
comparison.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 1 1 0 0 0 0 (HEX: 30)
Bit Description Setting Description Page Refer-
ence
7 Specifies whether to
return to the setting
for applying or not
applying the stored
(sent) stamp when
an operation is fin-
ished. 0 Does not stamp p. 6-19
1 Stamps
6 Specifies the posi-
tion of the stored
(sent) stamp. 0 Stamps at the top and
bottom of the document p. 6-19
1 Stamps only at the bot-
tom of the document
5, 4 ----------------------- 11 *Do not change these bits
when specifying settings
for this function. ----------
3 Specifies whether to
return to the setting
for comparing or not
comparing the
transmission pass-
word when an oper-
ation is finished. 0 Does not compare p. 6-22
1 Compares
2 Specifies whether or
not to compare the
transmission pass-
word. 0 Does not compare p. 7-2
1 Compares
1, 0 ----------------------- 00 *Do not change these bits
when specifying settings
for this function. ----------