Konica Minolta bizhub 222 - Manual (Page 150)

Registering/specifying settings 9
362/350/282/250/222/200 9-3
Regist
er
ing/
spe
c
if
ying set
ti
ngs
Chapter 9
3
Touch [FAX].
The FAX Registration
screen appears.
2
Note
If software switch settings were specified to limit use of the FAX Regis-
tration screen to the administrator, [FAX] does not appear in the User Set-
ting screen. In this case, destination can only be registered, edited and
deleted in Administrator mode. For details on the software switch set-
tings, refer to “Specifying software switch settings (machine functions)”
on page 10-67.
2
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the standby screen (initial screen).