Konica Minolta bizhub 222 User Manual
Page 230
Advertising
Utility mode
10
362/350/282/250/222/200
10-47
Utility mode
Chapter 10
4
Touch [Communication
Password].
5
Use the keypad to type
in the current two-digit
communication pass-
word, and then touch
[Next].
The password appears
as “**”.
6
Touch [New Password], type in the password, and then touch [Enter].
7
Touch [Confirm New Password], type in the password again, and then
touch [Enter].
8
Check the information to be registered, and then touch [Enter].
9
Touch [Enter] in each screen until the standby screen (initial screen) ap-
pears.
Advertising
This manual is related to the following products: