Konica Minolta bizhub 222 - Manual (Page 216)

Utility mode 10
362/350/282/250/222/200 10-33
Utility mode
Chapter 10
– After touching [De-
fault Density], touch
[Light] or [Dark] to se-
lect the density that
is given priority.
– After touching [Com-
munication Mode],
select the transmis-
sion mode that is giv-
en priority.
5
Touch [Enter].
6
Touch [Enter] in each screen until the standby screen (initial screen) ap-
pears.
2
Note
Certain communication modes may not be available, depending on the
machine settings. For details, check with the administrator.