Konica Minolta bizhub 222 - Manual (Page 47)

2 Transmission
2-4 362/350/282/250/222/200
T
ran
sm
iss
ion
Chapter 2
2.2 Feeding the document
With this machine, the document can be loaded into the ADF or placed on
the original glass. If the document is loaded into the ADF, the document is
scanned automatically from the ADF.
Loading the document into the ADF
If the ADF is used, documents containing multiple pages can be automati-
cally scanned. In addition, double-sided documents can also be faxed.
0 Do not load documents that are bound together, for example, with paper
clips or staples.
0 Do not load more than 80 sheets or so many sheets that the top of the
stack is higher than the , mark, otherwise a document misfeed or dam-
age to the document or machine may occur.
0 If the document is not loaded correctly, it may not be fed in straight or a
document misfeed or damage to the document may occur.
1
Close the ADF.
2
Load the document to
be faxed facing up.
– Load the document
pages so that the top
of the document is
toward the back or
the right side of the
machine.
– Lightly insert the end
of the document as
far as possible. The
machine makes a
noise when the doc-
ument is inserted.
A A