Konica Minolta bizhub 222 - Manual (Page 282)

Utility mode 10
362/350/282/250/222/200 10-99
Utility mode
Chapter 10
Specifying the deleting method for [Del.] in input screens (mode 478)
Specify the deleting method for [Del.] in input screens.
Select whether the character at the cursor’s position or the character to the
left of the cursor is deleted.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 1 0 0 0 0 0 0 0 (HEX: 80)
Bit Description Setting Description Page Refer-
ence
7 Specify the deleting
method for [Del.] in
input screens. 0 Deletes the character at
the cursor’s position p. 13-2
1 Deletes the character to
the left of the cursor
6, 5, 4, 3, 2,
1, 0 ----------------------- 0000000 *Do not change these bits
when specifying settings
for this function. ----------