Konica Minolta bizhub 222 - Manual (Page 96)

Troubleshooting 4
362/350/282/250/222/200 4-5
Tr
ou
b
les
ho
ot
ing
Chapter 4
Faxes cannot be received auto-
matically. Is the machine set to receive
faxes manually? Set the machine to auto-
matic reception.
Is the memory full? Load paper if it is empty,
and then print the faxes
stored in the memory.
Is the telephone line correctly
connected? Check the telephone line
connection. If it is discon-
nected, connect it.
Did an alarm appear? Follow the instructions
that appeared, and then
cancel the alarm.
Was the fax sent with an incor-
rect SUB for the F code? If an incorrect SUB is re-
ceived while a confidential
box is being used, a trans-
mission error occurs and
the fax cannot be re-
ceived. Check the SUB
setting on the sender’s fax
machine.
Black streaks appear through
the printout of the received fax. Is there a problem with the tele-
phone connection or with the
caller’s fax machine? Check that the machine
can make clean copies. If
no black streaks appear,
have the caller send the
fax again.
Symptom Cause Remedy