Konica Minolta bizhub 222 - Manual (Page 358)

Appendix 13
362/350/282/250/222/200 13-7
Appe
nd
ix
Ch
apt
e
r 13
Long original A setting for sending document pages longer than 11 × 17; Long docu-
ments can be transmitted by specifying the setting for long originals.
Main scanning di-
rection The horizontal direction for scanning documents
Manual transmis-
sion An operation to send a fax while checking the status of the receiving ma-
chine
Memory A location where data is temporarily stored; The memory is used when a
transmission is specified or a temporarily saved document is stored.
Memory overflow A condition where the fax memory becomes full when many documents
are scanned or temporarily saved documents are stored
Memory transmis-
sion The procedure for starting a fax transmission after a document is
scanned and stored in the memory; If memory transmission is used, the
total number of pages are automatically printed in the page number of the
transmission source information, and an image of the first page of the
sent document is included in the transmission activity report. However,
the memory may become full if there are many pages in the document or
if the data is large due to finely detailed images.
One-touch dial but-
ton One of the functions for registering the fax numbers of recipients where
faxes are frequently sent; When a speed dial or address is registered, the
recipient can also be specified by using search characters for speed dial
selection if the recipient name and search characters are registered.
Original counter Used with the quick scan transmission to send the fax with the number
of pages indicated; This allows the recipient to easily check if all pages
were received. (With a memory transmission, the total paper number is
automatically added.)
Overseas transmis-
sion A transmission to an overseas recipient; If an overseas transmission
mode is set, the fax is sent with a slower speed. Specifying an overseas
transmission mode when faxing to a location where transmission condi-
tions are poor, even within the country, ensures that the fax can be sent.
Password transmis-
sion A function for sending a transmission with a password applied; If the re-
cipient’s fax machine is set for closed network receptions, the sender’s
fax machine must transmit with the same password as the closed net-
work reception password.
Pause A temporary break in the dialing; Each pause creates a one-second break
during dialing.
PB Push-button (tone) line
Polling A function for sending a document loaded to be scanned or stored on a
machine when a requested by the recipient
Program A function for registering recipient fax numbers where faxes are frequent-
ly sent and received and preset transmission operations; By simply
touching the button of a program to select it, the transmission can be au-
tomatically performed with the specified recipients and functions.
Quick scan trans-
mission A function that begins sending the fax at the same time that the first page
is scanned; This function is used for faxing without filling the memory,
even if the document contains many pages.
Receiving The condition where the fax machine answers the call
Term Definition