Konica Minolta bizhub 222 - Manual (Page 48)

Transmission 2
362/350/282/250/222/200 2-5
T
ran
sm
iss
ion
Chapter 2
3
Slide the adjustable doc-
ument guides against
the edges of the docu-
ment.
Placing the document on the original glass
0 When placing the document on the original glass, be sure to lift open the
original cover or ADF at least 15°.
If the document is placed on the original glass without the original cover
or ADF being lifted at least 15°, the correct document size may not be de-
tected.
0 Do not place objects weighing more than 4-1/2 lb on the original glass. In
addition, do not press down extremely hard on a book spread placed on
the original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, scan without closing the original cover
or ADF. When a document is being scanned with the original cover or
ADF open, do not look directly at the light that may shine through the
original glass. Although the light that shines through the original glass is
bright, it is not a laser beam and, therefore, is not as dangerous.
0 The size of the following types of documents may not be correctly detect-
ed. In this case, specify the size before scanning. For details, refer to “Re-
duction/Area” on page 2-12.
- Documents with a dark background
- Documents that are transparent or where the back side can be read,
such as with overhead projector transparencies or tracing paper
- Non-standard-sized documents, long and thin documents, and docu-
ments that are not rectangular
- Documents smaller than 5-1/2 × 8-1/2 or larger than 11 × 17
0 An area of 3/8 inch on all sides of the document cannot be scanned.
0 When sending an 11 × 17- or Legal-size document, the fax is automati-
cally reduced to fit the size of paper loaded in the recipient’s fax machine.
To send an 11 × 17- or Legal-size document with its original dimensions,
cancel automatic reduction of sent faxes. For details, refer to “Reduction/
Area” on page 2-12.