Konica Minolta bizhub 222 - Manual (Page 273)

10 Utility mode
10-90 362/350/282/250/222/200
Utility mode
Chapter 10
Blocking calls from callers that are not specified (mode 306)
Specify whether or not only faxes (G3) received from callers with a specified
F-code (bulletin board/confidential/forwarding) can be received and all other
faxes (G3) are blocked.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Specifying the Internet fax settings (mode 350)
Specify the POP3 setting for Internet faxing.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7 Specify whether or
not to block calls
from callers that are
not specified. 0 Does not block p. 10-53
1 Blocks
6, 5, 4, 3, 2,
1, 0 ----------------------- 0000000 *Do not change these bits
when specifying settings
for this function. ---------
Bit 7 6 5 4 3 2 1 0
Setting 1 0 1 0 1 0 0 0 (HEX: A8)
Bit Description Setting Description Page Refer-
ence
7 ----------------------- 1 *Do not change this bit
when specifying settings
for this function. ---------
6 Specify whether to
enable a confirma-
tion (POP3) before
arriving at SMTP. 0 Arrival not confirmed ---------
1 Arrival confirmed