Specifying the “memory lock time” parameter, Rx settings) -37, Specifying the “memory lock time” parameter -37 – Konica Minolta bizhub 222 User Manual
Page 220: P. 10-37
Utility mode
10
362/350/282/250/222/200
10-37
Utility mode
Chapter 10
10.13 Specifying the printing period for received documents
(RX Settings)
Specify the time and day for setting the machine to off mode (setting where
printing is not immediate, even when a fax is received) and for printing a fax
that is received.
By regulating the time when printing is performed, faxes transmitted late at
night can be safely received.
Settings can be specified for the following.
2
Note
For details on entering a password to print the fax, refer to “Printing man-
ually” on page 10-40.
Specifying the “Memory Lock Time” parameter
1
After entering Administrator mode, touch [Admin. 1].
2
Touch [RX Settings].
Parameter
Description
Memory Lock Time
Specify the time to print received faxes that were not imme-
diately printed.
During the specified time period on the specified days, all re-
ceived faxes are collected and printed together. Specify the
day, starting time and ending time.
Memory Lock Password
Specify the four-digit password used to print faxes received
outside of the specified time period.