Konica Minolta bizhub 222 - Manual (Page 165)

9 Registering/specifying settings
9-18 362/350/282/250/222/200
Regist
er
ing/
spe
c
if
ying set
ti
ngs
Chapter 9
9.4 Registering a transmission program
If transmission settings are programmed together with recipient information,
transmission and reception is possible with the same transmission settings
simply by pressing that button. This is useful if transmission or reception op-
erations are performed frequently every day at a specific time.
There are three types of program buttons.
-
TX program: A one-touch dial button recipient, Quality, Density, Zoom
and Original Size Setting settings in addition to the “Quick Scan TX”, “Pri-
ority TX”, “Timer TX Setting”, “TSI”, “TX Report”, “Remote Copy”, “Pass-
word TX”, “2in1”, “2-Sided TX”, “Rotation TX” and “Stamp” functions can
be registered with a program.
- Batch program: A program for sending multiple documents at a specified
time can be registered.
- Polling RX program: The time for a polling reception can be specified.
!
Detail
Up to 30 fax programs can be registered. However, the total number of
one-touch dial buttons and fax programs must not exceed 540.
Specify the recipient with a one-touch dial button. The recipient must be
registered with the one-touch button in advance.
2
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the standby screen (initial screen).
Registering a transmission program
1
Press the [Utility/Counter] key.
2
Touch [User Setting].
3
Touch [FAX].